1.
Raise the implement.
2.
To move the harrow tines
1
into the flat
working position,
Install the pin
2
in the hole shown.
The harrow tine is resting on the plate
3
.
3.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
1
3
2
CMS-I-00003187
4.
Raise the implement.
5.
To move the harrow tine
1
to the medium
working position,
Install the pin
2
in the hole shown.
The harrow tine is resting on the pin.
6.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
2
1
CMS-I-00003186
7.
Raise the implement.
8.
To move the harrow tine
1
to the steep
working position,
Install the pin
2
in the hole shown.
The harrow tine is resting on the pin.
9.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
2
1
CMS-I-00003185
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
58
