1.
Raise the implement.
2.
Put the universal operating tool on the adjustment
spindle
1
.
3.
To reduce the seed placement depth,
turn the universal operating tool counter-
clockwise
-
or
To increase the seed placement depth,
turn the universal operating tool clockwise
+
.
4.
The scale
3
serves as orientation.
5.
Take off the universal operating tool and allow the
catch
2
to engage in a groove of the grid.
6.
To check the setting,
seed for approx. 30 m at working speed and
then check the work pattern, see "Checking the
placement depth".
CMS-I-00003114
6.3.5 Adjusting the placement depth on the RoTeC coulter
The placement depth can be adjusted in three stages
1
. The higher the position of the depth control discs
or depth control wheels, the greater the placement
depth. The greatest placement depth is achieved
when the depth control discs or depth control wheels
are completely removed.
NOTE
The adjustment of the seed placement depth must
be adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
2
3
1
CMS-I-00004587
CMS-T-00006301-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
53
