3.
Tighten the nut.
4.
To configure the working position sensor,
refer to the ISOBUS operating manual,
"Configuring the working position sensor".
6.3.2 Folding the lighting
The lighting must be folded in during operation.
Move both lighting panels
1
into parking
position.
1
CMS-I-00003214
6.3.3 Unfolding the implement
1.
To release the transport lock,
observe the soil tillage implement operating
manual.
2.
Activate the function on implements with
Comfort hydraulic system,
see ISOBUS software operating manual "Pre-
selection for hydraulic functions".
3.
To unfold the seeding combination,
actuate the "green 2" tractor control unit.
6.3.4 Adjusting the placement depth on the TwinTeC coulter
NOTE
The adjustment of the seed placement depth must
be adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
CMS-T-00004418-A.1
CMS-T-00004419-B.1
CMS-T-00004360-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
52
