1.
Pull on the lever
X
for the depth control disc
or depth control wheel, move it up or down and
engage it in the desired position
or
To completely remove the depth control disc or
depth control wheel,
move the lever all the way down and push it
to the rear in the elongated slot
2
until the
depth control disc or depth control wheel can be
removed.
2.
Set all of the depth control discs or depth control
wheels at the same height or remove them
completely.
3.
To check the adjustment of the placement depth
on the field,
seed for approx. 30 m at working speed and
then check the work pattern, see "Checking the
placement depth".
4.
If the required placement depth has not yet
been reached, the coulter pressure must also
be adjusted, see "Adjusting the coulter pressure
mechanically" or "Adjusting the coulter pressure
hydraulically".
6.3.6 Adjusting the coulter pressure hydraulically
NOTE
The adjustment of the coulter pressure must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
WARNING
Combined movement of the coulter and
exact following harrow
The hydraulic cylinders for the coulter
pressure adjustment and the exact following
harrow pressure adjustment are actuated
simultaneously.
Before you actuate the tractor control
unit,
direct people out of the danger area.
CMS-T-00004361-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6545-EN-II | B.1 | 22.07.2021
54
