Amazone AD-P 3001 Special 850, Руководство по эксплуатации

Страница: 82 / 214

Layout and function
82
AD-P 30/35/4001 SPECIAL BAH0095-2 11.17
Fig. 75
The tramline control allows the creation of tramlines (A) at pre-selected intervals on the field.
The tramline spacing (b) corresponds to the working width of the cultivating implements (B), e.g.
fertiliser spreader and/or field sprayer, which are used on the seeded field.
To set the different tramline spacings (b), the corresponding tramline rhythms must be set (see Table
Fig. 78).
The figure shows tramline rhythm 3. During operation, the field passes are numbered consecutively
(tramline counter) and displayed on the control terminal.
In tramline rhythm 3, the tramline counter shows the field passes in the following order: 2-0-1-2-0-1-2-
0-1…etc.
When creating a tramline, the tramline counter displays the tramline value "0".
The required tramline rhythm (see following table) is derived from the required tramline spacing (b)
and the working width of the seed drill. Other tramline rhythms can be found in the control terminal.
The track width (a) of the tramline corresponds to that of the cultivating tractor and is adjustable.
The wheelmark width (c) of the tramline increases with an increasing number of tramline coulters fitted
next to each other.