33
PROPER INSTALLATION
W A R N IN G
USE OF SETBACK TEMPERATURES
Do not use motion sensing setback temperatures in rooms
where incapacitated persons or animals are unable to change
the control setting.
An unattended air conditioner with extreme setbacks may
result in undesirable or unhealthy temperatures in the
conditioned space causing under heating, under cooling or
death of persons or animals.
4. To select first unoccupied set back temperature,
press the
HEAT
key until
feature code
comes up. To scroll to a previously viewed feature
codes, press the
COOL
key.
Once you have scrolled to the
feature, press ei-
ther the up or down arrow
to scroll to the de-
sired first unoccupied setback temperature. Cooling
example: 72
0
(guest set point) + 2
0
(Setback tempera-
ture) = 74
0
(operational set point).
5. Press
HEAT
key to scroll to
first unoccupied
setback time. The first unoccupied setback time is
the time between when the control determines that
the room is not occupied and when the control sets
the operating set point temperature back. The incre-
ments are in hours (.1 = 6 mins., .5 = 30 mins., 1 = 1
hour, etc.). Press either the up or down arrow
to the desired first unoccupied setback time.
6. To select second unoccupied setback temperature,
press the
HEAT
key until
comes up. Press
either the up or down arrow
to the desired sec-
ond unoccupied setback temperature.
Cooling example: 72
0
(guest set point) + 4
0
(Setback
temperature) = 76
0
(operational set point).
7. Press
HEAT
key to scroll to
second unoccu-
pied setback time. Press either the up or down arrow
to the desired second unoccupied setback time.
Example: Operating set point would be 76
0
instead of
72, one hour (1.0 hour) after guest leaves room.
8. Press
HEAT
key to scroll to
third unoccu-
pied setback temperature. Press either the up or
down arrow
to the desired third unoccupied set-
back temperature.
9. Press
HEAT
key to scroll to
third unoccu-
pied setback time. Press either the up or down arrow
to the desired third unoccupied setback time.
10..
To
exit configuration mode
:
Press
the
OFF
key.
NOTE:
Configuration fea-
ture mode will also automatically exit
if no keys are
pressed
for a period of
two (2) minutes.
The changes made in configuration mode are now in
effect.
NOTE:
Additional codes are present and may be accessed
within this menu. Contact the manufacturer for additional
information.
