Amana PTC073E Series, Инструкция по эксплуатации

Страница: 13 / 82

13
SPECIFICATIONS
HEAT PUMP HEATING DATA
Notes:
¹ All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-wire kit (PTPWHWK4).
² Minimum Circuit Ampaci ty (MCA) ratings conform to the National Electric Code; however, local codes should apply.
Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.
³ Minimum voltage on 265-volt models is 239 volts; maximum is 292 volts.
5
Heating capacity and efficiency based on unit operation without condensate pump; unit automatically swi tches to electric heat at approximately 24°F outdoor ambient.
6
Specify two-digit heater kW size to complete model number.
7
R-410A refrigerant used in all systems.
8
All units meet or exceed ASHRAE 90.1 standards.
9
All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.
10
Refer to electric heat performance data for total MCA and r ecommended overcurrent protection. Amps and Watts notation refers to compressor only.
4
Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay fuses
(included and factory-installed on all Amana® brand 265-volt chassis). See heater performance for total MCA.
PTH E SERIES
PTH F SERIES
PTH
073E**AXXX
PTH
093E**AXXX
PTH
123E**AXXX
PTH
153E**AXXX
PTH
074E**AXXX
PTH
094E**AXXX
PTH
124E**AXXX
PTH
154E**AXXX
230 / 208 230 / 208 230 / 208 230 / 208 265 265 265 265
BTU/h
5
6,800 / 6,800 8,300 / 8,100 10,900 / 10,500 13,500 / 13,300 6,800 8,200 11,000 13,500
3.5 / 3.5 4.1 / 4.1 5.6 / 5.6 7.0 / 7.0 3.0 3.6 4.8 6.0
605 / 605 735 / 720 1040 /1020 1365 / 1345 585 730 1040 1365
COP
5
3.3 / 3.3 3.3 / 3.3 3.1 / 3.1 2.9 / 2.9 3.4 3.3 3.1 2.9
CFM (Dry) 310 310 310 360 310 310 310 360
COP = Coefficiency of Performance; per AHRI Test Procedures, units are rated for capacities and efficiencies.
Heating Capacity¹
Amps
10
Watts
10
Voltage ¹, ³
Notes:
¹ All 265-volt models must use an Amana® brand sub-base (PTSB4**E) or an Amana® brand hard-wire kit (PTPWHWK4).
² Minimum Circuit Ampaci ty (MCA) ratings conform to the National Electric Code; however, local codes should apply.
Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.
³ Minimum voltage on 265-volt models is 239 volts; maximum is 292 volts.
5
Heating capacity and efficiency based on unit operation without condensate pump; unit automatically swi tches to electric heat at approximately 24°F outdoor ambient.
6
Specify two-digit heater kW size to complete model number.
7
R-410A refrigerant used in all systems.
8
All units meet or exceed ASHRAE 90.1 standards.
9
All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.
10
Refer to electric heat performance data for total MCA and r ecommended overcurrent protection. Amps and Watts notation refers to compressor only.
4
Overcurrent protection for all units without electric heaters is 15 amps. Overcurrent protection on 265-volt models must be cartridge-style time-delay fuses
(included and factory-installed on all Amana® brand 265-volt chassis). See heater performance for total MCA.
PTH
123F**AXXX
PTH
124F**AXXX
230 / 208 265
BTU/h
5
10,900 / 10,500 11,000
5.6 / 5.6 4.8
1040 /1020 1040
COP
5
3.1 / 3.1 3.1
CFM (Dry) 310 310
COP = Coefficiency of Performance; per AHRI Test Procedures, units are rated for capacities and efficiencies.
Heating Capacity¹
Amps
10
Watts
10
Voltage ¹, ³