Amada UNIFLOW 4 REMOTE, Руководство по эксплуатации, Страница: 67 / 176

CHAPTER 3: USING PROGRAMMING FUNCTIONS
UNIFLOW
®
4 PULSED HEAT CONTROL
990-908 3-17
Pressing
1
will toggle
REPLACE
COUNTER
between
ON
and
OFF
.
ON
will
activate this feature and
OFF
will de-
activate it.
Pressing
2
will toggle
REPLACE
COUNTER ACTION
between
STOP
and
CONTINUE
. When the replace counter
< REPLACE COUNTER SETUP >
1. REPLACE COUNTER : OFF
2. REPLACE COUNTER ACTION : STOP
3. EDIT CLEAN COUNTER : +000008
Number Select an item, Graph / Data
value is reached,
STOP
will require the
user to reset the replace counter before the Control will run another process and the System Ready
relay state will be inactive.
CONTINUE
will allow the Control to perform additional processes even if
the replace counter is not reset. If
CONTINUE
is selected, the Control will continue to display the
Replace Counter message after each process and the System Ready relay state will be active.
Press
3
to edit the remaining counts before the
Replace Counter
must be reset. With the numeric
keys, you may select a number up to 999999.
Schedule Edit Keys
The Schedule Edit Keys allow you to edit the time and temperature parameters of the heat profile on the
graphic display. These keys for each process segment are vertically aligned with the profile heating
states as displayed on the graphic screen.
The keys are
only active when the
GRAPH
screen (below) is displayed.
Example: To change the temperature of the Reflow period for Heating Profile 1 to 500

C:
1.
Press the
GRAPH
key to
display the graphic screen.
2. Press the
REFLOW
key. The
Reflow temperature value of
350 will now be highlighted.