Amada MF-C300A-SF, Оригинальное руководство пользователя, Страница: 85 / 199

4 . Setting the Laser Light Output Schedule
85
MF-C300A-SF/C500A-SF
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
How to see the displayed items
: Settable item
SET POWER Sets the laser output. Regarding “POINT 01” to “POINT 20”, set the ratio (%)
supposing that the set value is the reference value (100%). Refer to “REFER-
ENCE VALUE” for the forecast value of laser output.
<Note>
The settable value of laser output differs depending on the model.
MF-C300A-SF: 30 to 300 / MF-C500A-SF: 50 to 500
MIN The ratio of the preliminary oscillation output for "SET POWER" is displayed.
For the preliminary oscillation, see page 82.
Scrolls the POINT display column of POINT 01 to POINT 20 to the right and left.
When a POINT is not displayed, press this button to display it.
POINT 01 to 20
Set the laser output time and laser output value at each point of "POINT 01" to
"POINT 20."
REFERENCE
VALUE
The forecast value of laser output (W) based on 100% POWER with the set la-
ser output schedules is displayed.
<Note>
There is a little difference between the forecast value of laser output and the
measured value (actually measured value) depending on the optical and electri-
cal characteristics. Use the forecast value of laser output as reference.
RESOL
When this button is pressed, the selected setting resolution can be set from 1 s,
0.1 s, 0.01 s, or 0.001 s.
When the setting resolution is changed, the currently-selected schedule is
cleared and the initial value is set.
MODU When this button is pressed, the modulation setting screen for the selected
schedule number opens. Blinks when the modulation function is enabled. The
function can be set on the MODULATION screen.
Fn
When this button is pressed, a window to select function is displayed and the fol-
lowing editorial assistant functions can be used.
RESET: Initializes the currently-selected schedule.
COPY: Copies the currently-selected schedule to a temporary memory buffer.
PASTE: Restores data from a temporary memory buffer to the currently-select -
ed schedule.
⇒
For the common items in the upper/lower part of the screen, refer to page 57.