Amada MF-C300A-SF, Оригинальное руководство пользователя, Страница: 73 / 199

3 . Changing the Equipment Settings
73
MF-C300A-SF/C500A-SF
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
(4) Press the ENTER key on the keyboard.
A confirmation screen appears.
⇒ Unless 4 alphanumerical characters are not entered, an error message appears.
Enter the password once again.
(5) Enter the same password into the password re-input box (lower portion) and
press the ENTER key.
The set password is registered and PASSWORD CHANGED appears.
⇒
Unless the two passwords coincide, the WRONG PASSWORD screen appears.
Press the OK button and enter the same password.
(6) Press the OK button.
The PASSWORD screen appears.
⇒
The display of CURRENT PASSWORD changes to the changed password.
The items that can be protected are as follows.
Display Screen Item
SCHEDULE Screen SCHEDULE (Schedule number)
FORM (FIX/FLEX/CW waveform switching)
SET POWER (Laser output set value)
RESOL (Input resolution of output time)

SLOPE (Time for up-sloping to FLASH1)
FLASH1 (Output time and output value of the first laser)
COOL1 (Non-laser output time to be inserted between FLASH1 and
FLASH2)
FLASH2 (Output time and output value of the second laser)
COOL2 (Non-laser output time to be inserted between FLASH2 and
FLASH3)
FLASH3 (Output time and output value of the third laser)