Amada MF-C300A-SF, Оригинальное руководство пользователя, Страница: 150 / 199

150
MF-C300A-SF/C500A-SF
4 . Commands
⇒
If the pulse width becomes long, the total number of waveform data can be con-
trolled to 100 or less by extending the measurement interval.
(Example)
Pulse width Measurement interval
0.05 to 0.45 ms 0.005 ms
0.50 to 0.90 ms 0.01 ms
0.95 to 1.80 ms 0.02 ms
1.85 to 4.50 ms 0.05 ms
4.55 to 9.00 ms 0.1 ms
9.05 to 18.00 ms 0.2 ms
18.05 to 45.00 ms 0.5 ms
45.05 to 90.00 ms 1.0 ms
90.05 to 180.00 ms 2.0 ms
180.05 to 450.00 ms 5.0 ms
450.05 to 900.00 ms 10.0 ms
⇒
Since the number of data to be sent each time is limited to 5, it is necessary to
change the classification No. according to the "number of waveform data of the
laser power monitor" sent by "R00 nn 04" to perform repeated reading.
51 LD Output Total Time
Data No . Item Data Range
01* [FLASH WORK TIME] on the [STATUS] screen 0000000 – 9999999 (×0.1H)
40 Backup Memory Settings
Data No . Item Data Range
01* [NETWORK #] on the [CONFIG] screen 00 – 15
02* [IP ADDRESS] on the [CONFIG] screen 000000000000 – 999999999999
03* [SUBNET MASK] on the [CONFIG] screen 000000000000 – 999999999999
04* [DEFAULT GATEWAY] on the [CONFIG] screen 000000000000 – 999999999999
05* Unused Fixed to 00
06* Unused Fixed to 000
07* Unused Fixed to 0
08* Unused Fixed to 00000000
09* Unused Fixed to 00000000
10* Unused Fixed to 00000000
11* Unused Fixed to 00000000
12* Unused Fixed to 00000000
13* Unused Fixed to 00000000