Amada MF-C300A-SF, Оригинальное руководство пользователя, Страница: 123 / 199

3 . Connector Functions
123
MF-C300A-SF/C500A-SF
Chapter 4 Laser Processing by External Input/ Output Signals (EXTERNAL
CONTROL)
Introduction Part
Operating Part
Maintenance Part
Appendixes
Installation
and
Preparation
Part
REM . I/L Connector
The REM. I/L connector connects the interlock to turn off the LD in an emergen -
cy .
CAUTION
This connector can be used only when replacing our old products . Use the E-STOP
connector for the emergency stop signal in accordance with machine safety
standards .
⇒ Use the following attached connector.
Plug Case Manufacturer
116-12A10-2AF10.5 TAJIMI ELECTRONICS CO., LTD.
Pin No . Description
1
When the section between pin No.1 and pin No.2 is put an open circuit, the LD is turned
off.
2
⇒
When the section between 2 pins of this connector is opened by operating the
external interlock, both guide light and laser output are stopped. Connect this
connector to the main interlock, chamber interlock, door interlock, or other inter-
lock. A multiple number of these interlocks may be connected in series as re-
quired. At delivery, the connector for short circuit is installed.
⇒ To release the interlock, put the section between pin No.1 and pin No.2 a closed
circuit and press the TROUBLE RESET button displayed on the laser controller.
Inside of the laser REM. I/L connector
+24V
External interlock
0V
RY
1
2
100 mA max.