Amada HF2, Руководство по эксплуатации

Страница: 90 / 134

CHAPTER 7: SPECIAL FEATURES
2 KHZ INVERTER WEDLING POWER SUPPLY
7-12 990-057
2 Select
RESET TO DEFAULTS
. The
RESET DEFAULTS
screen will appear.
3 Select
RESET SYSTEM PARAMETERS
and Press
ENTER
. The
RESET SYSTEM
PARAMETERS PROCEED?
option line
appears.
4
Press
CHNG
to change
NO
to
YES
to reset
all System Parameters to their factory
default settings, followed by
ENTER
.
Refer to the table below for a list of the
factory default settings. When the reset
process is complete, the bottom of the
screen will display the message
SYSTEM
PARAMETERS ARE RESET
.
SYSTEM PARAMETERS DEFAULT SYSTEM PARAMETERS DEFAULT
POWER UP SCHEDULE LAST FIRING SWITCH 2-WIRE
END CYCLE BUZZER OFF SWITCH DEBOUNCE TIME 10 ms
KEY CLICK ON AUTO GAIN ADJUSTMENT ON
CHAIN SCHEDULES FEATURE OFF RS-485 BAUD RATE 9,600
BASIC WELD MONITOR OFF RS-485 I.D. NUMBER 01
WELD HEAD TYPE AUTO RS-485 ROLE CLIENT
FOOTSWITCH TYPE AUTO RELAY 1, RELAY 2 OFF
FOOTSWITCH WELD ABORT ON
5 Select
RESET ALL SCHEDULES/PROGRAMS
. Press
ENTER
. The
RESET ALL SCHEDULES /
PROGRAMS PROCEED?
option line appears.
6 Press
CHNG
to change
NO
to
YES
to reset
all Weld Schedules and Built-in Weld
Sentry Programs to their factory default
settings, followed by
ENTER
.