Amada HF2, Руководство по эксплуатации

Страница: 19 / 134

2 KHZ INVERTER WEDLING POWER SUPPLY
990-057 2-1
CHAPTER 2
GENERAL SET-UP
REQUIRED CONNECTIONS
Physical Space Requirements
AMADA WELD TECH recommends that the Power Supply and Transformer be installed in a well
ventilated area that is free from excessive dust, acids, corrosive gases, salt and moisture. Allow sufficient
clearance around both sides and back of the Power Supply (Figure 2-1) and Transformer (Figure 2-2) so
that cooling air may flow properly.
Figure 2-1. Power Supply
Air Flow Pattern
Figure 2-2. Transformer
Air Flow Pattern
HF2 Welding Power Supply Dimensions
Width (in / cm) Height (in / cm) Depth (in / cm) Weight (lb. / kg)
10.5 / 26.7 8.5 / 21.5 15.0 / 38.1 42 / 19
HF2 Welding Transformer Dimensions
Model Height (in / cm) Width (in / cm) Depth (in / cm) Weight (lb. / kg)
IT-X2A/2000A 7.0 / 17.6 5.4 / 13.8 11.0 / 28.0 14.3 / 6.5
IT-X3A/4000A 7.2 / 18.3 7.2 / 18.3 13.4 / 34.0 28.6 / 13
IT-X11A/4000A 7.5 / 18.9 7.2 / 18.3 17.9 / 45.5 46 / 21
IT-X11A/4/460A 7.4 / 18.8 7.2 / 18.3 18.9 / 48.5 55 / 25
IT-X3A/4/380A 7.2 / 18.3 7.2 / 18.3 13.4 / 34.0 28.6 / 13
IT-X3A/4/460A 7.2 / 18.3 7.2 / 18.3 13.4 / 34.0 28.6 / 13
HF2
POWER
SUPPLY
(top view)
Air Output (Rear)
Air Input
Left Side
Air Input
Right Side
Front
Air Input
Left Side
Front
Air Input
Right Side
HF2
WELDING
XFRMR
(top view)