Amada HF2, Руководство по эксплуатации

Страница: 81 / 134

CHAPTER 7: SPECIAL FEATURES
2 KHZ INVERTER WEDLING POWER SUPPLY
990-057 7-3
Local Control
1 From the Weld Graph
RUN
State, press
PROGRAM
twice to select the Alphanumeric
PROGRAM
screen for Schedule 001.
2 Select
NEXT: 001.
Change 001 to the desired next schedule, 002 in this example, so that Schedule
001 will automatically advance to
Schedule 002
after one weld has been completed. If you want
to make more than one weld using
Schedule 001
before advancing to
Schedule 002
, change
STEP:
00001
to the desired number of welds.
3 Press
SAVE
to save the updated Schedule 001. You are now back in the Weld Graph
RUN
State.
Remote Control -- Chain Schedule Control Box
The following procedure will program an example weld schedule chain of Schedule 001 through 004,
with 001 being the default power up schedule. NOTE: Only four weld control schedules can be used with
the chain schedule control box.
1 From the
MAIN MENU
screen select
TRANSFORMER MODEL
. On the
TRANSFORMER MODEL
screen, set:
•
MULTIPLE HEADS: ON
.
•
All transformer types to the same model (it does not matter which one)
2 From the
MAIN MENU
screen select
OPTIONS
. Access the
OPTIONS 1
menu and select
POWER
UP SCHEDULE
. Enter 001 as the power up schedule.
3 Access the
OPTIONS 2
menu. Select
WELD HEAD TYPE
and change the type to
AUTO
.
4 Access the Alphanumeric
PROGRAM
screen. Select the following parameters:
•
SCHEDULE 001
•
BASIC WELD
•
NEXT: 002
•
HEAD 1
5 The Alphanumeric
PROGRAM
screen
will now appear as shown in Figure 7-4.
Save the settings for Schedule 003. The
remaining schedules need to be
program-med.
Figure 7-4. Weld Schedule in
PROGRAM State -- Power Up
Weld Schedule Programmed.