Altusen ALTUSEN KN2116, Руководство пользователя

Страница: 84 / 141

KN2108 / KN2116 User Manual
68
Multiuser Operation
The KN2108 / KN2116 supports multiuser operation. Up to 32 users can log in
at the same time. When multiple users simultaneously access the KN2108 /
KN2116 switch from remote consoles, the rules of precedence that apply are
shown in the following table:
Note: 1. The KN2108 / KN2116 only supports two remote buses. The first,
third, fifth, etc., users to log in are all on one bus; the second, fourth,
sixth, etc., users to log in are all on the other bus. When a user changes
to a port everyone on the same bus changes to that port, as well.
2. We recommend that the user who starts Panel Array Mode set it to
display at least four panels. Otherwise, it is possible that the other
users may only receive part of the picture.
Operation Rule
General Once a user invokes the OSD, no other user can invoke it
until the original user closes it.
Auto Scan Mode If a user has invoked Auto Scan Mode (see page 64), but
the OSD has not been invoked, another user can interrupt
Auto Scan Mode by invoking the OSD.
Panel Array Mode Š
Once a user has invoked Panel Array Mode (see
page 66), all successive users automatically enter Panel
Array Mode. Panel Array Mode continues until the original
user stops it. (Administrators can override Panel Array
Mode, however.)
Š
Only the user who starts Panel Array Mode can use the
Skip Mode (see page 65), function.
Š
Only the user who starts Panel Array Mode can switch
ports. Other users automatically switch to the ports that
the original user selects. However, if an individual user
does not have access rights to the port that the original
users switches to, he will not be able to view that.
Š
Individual users can increase or decrease the number of
panels they wish to view in Panel Array Mode; however,
the picture quality may decrease as the number of panels
decreases.
kn2116.book Page 68 Thursday, July 10, 2008 4:05 PM