Altusen ALTUSEN KN2116 страница 13 Скачать руководство пользователя

Страница: 13 / 141

KN2108 / KN2116 User Manual

xiii

About This Manual

This User Manual is provided to help you get the most from your KN2108 /
KN2116 system. It covers all aspects of installation, configuration and
operation. An overview of the information found in the manual is provided
below.

Overview

Chapter 1, Introduction,

introduces you to the KN2108 / KN2116 System.

Its purpose, features and benefits are presented, and its front and back panel
components are described.

Chapter 2, Hardware Setup,

provides step-by-step instructions for setting

up your installation, and explains some basic operation procedures.

Chapter 3, Administration,

explains the administrative procedures that are

employed to configure the KN2108 / KN2116’s working environment, as well
as how to operate the KN2108 / KN2116 from the local console.

Chapter 4, Browser Operation,

describes how to log into the KN2108 /

KN2116 with your browser, and explains the functions of the icons and buttons
on the KN2108 / KN2116 web page.

Chapter 5, The Windows Client,

explains how to connect to the KN2108

/ KN2116 with the Windows Client software, and describes how to use the
OSD to access and control the computers connected to the switch.

Chapter 6, The Java Client,

describes how to connect to the KN2108 /

KN2116 with the Java Client software, and explains how to use the OSD to
access and control the computers connected to the switch.

Chapter 7, The Log File,

shows how to use the log file utility to view all the

events that take place on the KN2108 / KN2116.

Chapter 8, The Log Server,

explains how to install and configure the Log

Server.

Chapter 9, AP Operation,

describes how to operate the KN2108 / KN2116

using Windows and Java Client application programs, rather than with the
browser method.

An Appendix,

at the end of the manual provides technical and

troubleshooting information.

kn2116.book Page xiii Thursday, July 10, 2008 4:05 PM

Содержание ALTUSEN KN2116














































































































































Результаты поиска

Содержание ALTUSEN KN2116

Отзывы:

Похожие инструкции для ALTUSEN KN2116

Бренды по названию

Популярные бренды

Altusen ALTUSEN KN2116, Руководство пользователя

Результаты поиска

Содержание ALTUSEN KN2116

Отзывы:

Похожие инструкции для ALTUSEN KN2116

Бренды по названию

Популярные бренды