7
Side Assembly
4
Start by attaching the cast
eaves brackets (EV1000M) to
four eaves rails (EV0953).
First of all drill pilot holes
through the eaves bracket
into the end of the eaves
bar. Be careful not to drill all
the way through the rail!
Once the bracket is firmly in
position fix with the 40mm
countersunk (CSK) screws
(diagrams 5 and 6).
Diagram 6
Diagram 7
Diagram 8
X 4
Diagram 5
Dia. 6
40mm Screw
Once you have attached all the cast eaves brackets you can fix two standard side glazing bars
(EV0969) to each of the prepared eaves rails. Make sure the glazing bar is tight into the bracket
(diagrams 7 and 8), drill pilot holes and fix using 50mm CSK screws. Don’t over tighten these screws
as it may make it difficult to glaze later in the build.
50
mm
Sc
rew
EV1000M
EV095
3
EV0953
EV0
953
EV1000M
EV0969
EV0969
EV0953
EV1000M
External
Internal
External
