25
Lantern Assembly
9
Next add the handed lantern top roof bars (EV1096 / EV1097) and fix again as you did your middle
roof bars (diagrams 48 and 49) using
50mm
CSK screws.
Between these bars you can fix the vent slam rails (EV1077). When using the optional aluminium
capping this should be fitted on the long side face. If using the cedar capping then the short face
should be used so the slam rail sits higher (cedar orientation shown in diagram 57).
Diagram 57
E
V
1
0
9
6
EV1077
E
V
1
0
9
7
The lantern sides are glazed from below. In order to insert the glass it is easiest to flip the lantern
over onto its ridge getting someone to help and then hold during glazing.
Diagram 58
