HIGH LEVEL SHELVING
High Level Shelving Alton Amateur from Summer Greenhouses
If your greenhouse has a middle or double brace
the high level shelving is required to fit around
the brace. See fig 5.
fig 5
Middle brace
support bracket
Two
3
/
4
” / 19mm
csk screws
A slat will have to be removed and the shelf will
need cutting. Hold the shelf in position and mark
the length- centre of both the brace and double
bracket.
With a spirit level, ensure the shelf is level. Offer
up the support bracket and secure with two
3
/
4
”/
19mm No.8 csk. screws.
Hint: Replacing the removed slat ‘finishes off’ the
overall good looks of the greenhouse. Measure
the slat accordingly and cut to length at the same
angle as the brace. Fix with two nails to the shelf
support timber.
page 24
Phone Summer Greenhouses free 7 days a week on 0800 9777 828 or visit www.SummerGreenhouses.com