Bracing supports
see
BRACING & SUPPORTS
DIFFERENT BRACING AND SUPPORT METHODS ARE REQUIRE FOR DIFFERENT
LENGTHS OF GREENHOUSE, PLEASE READ CAREFULLY BEFORE PROCEEDING
see
fig 2
see
fig 5
fig 3
see
fig 4
IF YOUR GREENHOUSE IS LONGER THAN
13’/3.96m please also refer to the instructions on
page 17, regarding Middle Braces and Double Braces.
Gable end braces are fixed as shown in fig 4 & 5.
Double check the verticals before securing with
1
1
/
4
” / 32mm countersunk screws as shown.
fig 3
BUILDINGS 10’ / 3.05m AND LONGER
Fix the ridge braces to every glazing bar except at
the gable ends. These are 2’/610mm in length and
should be positioned centrally and secured with 4 off
1
1
/
4
”/32mm countersunk screws for each. See fig 2.
12
1
/
4
”
/312mm
fig 2
fig 4
Fix the eaves braces on every glazing bar except at
the gable ends as shown in fig 3. These braces are
1’10” / 560mm in length and are secured by 4 off
1
1
/
4
”/32mm countersunk screws.
fig 5
Measure a distance of 12
1
/
4
”/312mm down from the
top of the side section to get the correct position of
the end of each brace.
page 16
Phone Summer Greenhouses free 7 days a week on 0800 9777 828 or visit www.SummerGreenhouses.com
