HIGH LEVEL SHELVING
High Level Shelving Alton Amateur from Summer Greenhouses
The high level shelving can be fitted to either side
of the greenhouse.
To locate the brackets for the high level shelf
measure 13
1
/
2
”/345mm down from the top of the
side panel at each glazing bar and gable ends. See
fig 2.
This is the location of the screw hole for each
bracket. Fix the brackets with
3
/
4
”/19mm round
head No 10 screws. See fig 2. The double bracket
is used where the lengths of shelving meet and
are fixed to where side panels are joined. See fig3.
Place the shelf on the brackets and position the
shelf strap. After drilling pilot holes fix the bottom
fig 2
Measure down
13
1
/
2
" / 345mm
3
/
4
" / 19mm
roundhead screw
Shelf Bracket
fig 3
of the strap flush to the shelf bearer and fix the
top to the roof glazing bar making sure the shelf
is level. See fig 4. Screws for fixing are
3
/
4
”/19mm
No.8 csk.
fig 1
see
fig 4
see
fig 2
see
fig 3
Two
3
/
4
" / 19mm
roundhead screws
Measure down
13
1
/
2
" / 345mm
Double Shelf
Bracket
fig 4
Diagram shows a greenhouse with no
middle brace, eg: shorter than 13’7”
in which case two metal support
straps are used to hold the shelving.
page 23
Phone Summer Greenhouses free 7 days a week on 0800 9777 828 or visit www.SummerGreenhouses.com
