Altigen AltiWare OE 4.6, Руководство администратора, Страница: 308 / 518

Setting Dialing Pattern Routing
9-8 AltiWare OE System Installation & Administration Manual
Example: 10-Digit Dialing
A sample use of dialing patterns is enabling 10-digit dialing, which some
geographical areas require. Normally, AltiServ prepends a “1” to 10-digit
numbers when users use single-click calling features such as zoomerang or
calling from a Contacts list in AltiView or a TAPI-enabled application.
This could cause some calls to fail. Here is how you would enable 10-digit
dialing.
1. On the Route Definition tab, define a route that deletes one digit from
the head.
2. On the Dialing Pattern tab, create a dialing pattern with Prefix set to
<1+area code>, such as “1408,” and Pattern length set to “11,” where
area code is different from the AltiServ system but requires 10-digit
dialing.
3. Assign the Route Priority for this dialing pattern to the Index of the
route definition you created above.
4. Repeat steps 2 and 3 above for other area codes requiring 10-digit
dialing as necessary.
Reducing Dialing Delay For En-Bloc Trunks For Non-US/
Canada Countries
When using a country code other than USA & Canada in System
Configuration, there will be a 7 second dialing delay for en-bloc trunks. To
reduce this delay, Out Call Routing Configuration can be used as a
workaround.
To reduce dialing delay:
1. In the Number Plan page of System Configuration, select a digit for
route access.
2. In the Route Definition page of Out Call Routing Configuration,
add a route definition entry for en-bloc and assign the member en-bloc
trunk(s).