Altigen AltiWare OE 4.6 Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 518

Altigen AltiWare OE 4.6 Скачать руководство пользователя страница 101

Software Installation

AltiWare OE System Installation & Administration Manual

3-19

3

.S
o

ft

w

a

re

In

st

al

lat
io

n

• On the NT desktop, Open the Control Panel and double-click

Services.

2.

Highlight AltiGen Switching Service COM Server.

3.

Stop the service.

If the status column is empty, proceed to the next step. If the status
column says Started, double-click the listing to open the Properties
dialog box, then click the Stop button followed by the OK button to
close the dialog.

To Begin Upgrade

To complete the upgrade:

1.

Make sure you have prepared for installation as described beginning
on page 3-2.

2.

Install the System Key on the parallel or USB port.

Caution:

Do not connect the system key to any AltiGen board as

damage may occur to the board or the system key.

3.

Login to Windows NT or Windows 2000 as a domain or local user
account that has local administrator privileges.

If your machine is a stand-alone server, you need to login as a local
administrator account.

Note:

If you plan to run Exchange Integration, you must have domain
administrator rights.

4.

Insert the AltiWare OE CD-ROM into the CD-ROM drive.

5.

Select and read the Readme.txt file.

6.

After reading the Readme.txt file, click on SETUP.EXE in the
AltiWare OE folder.

7.

At the Welcome page window, exit all Windows programs before
continuing with the setup, then click Next.

«
...
99
100
101
102
103
...
»

Содержание AltiWare OE 4.6







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов