Altigen AltiWare OE 4.6, Руководство администратора

Страница: 207 / 518

Board Configuration
AltiWare OE System Installation & Administration Manual 6-25
6.
B
o
a
rd
Confi
g
ur
a
tion
If this H.323 endpoint is NetMeeting integrated with AltiView, you need to
set all unknown TCP/UDP ports to be forwarded to the IP phone's private
IP address. This is usually referred to as DMZ port forwarding in most
NAT routers.
Setting Up an AltiWare-to-AltiWare IP Network
Two or more AltiWare systems can be networked together to provide
extension-to-extension connections via IP trunk calls. Users may dial a
remote AltiWare’s auto attendant or direct dial to an extension, without
having to dial out through the PSTN. A diagram illustrating a multiple
AltiWare-to-AltiWare connection is provided below and is referred to as an
example throughout the configuration instructions below.
Figure 11. AltiServ-to-AltiServ Connection
Follow the steps below to configure IP trunks for an AltiWare-to-AltiWare
tie-trunk line connection:
1. Confirm that the correct number of Triton VoIP boards are installed
and connected by checking the Boards window on the Main Window
of AltiWare Administrator. Refer to “Boards View Window” on page
4-5 for more details about this window.
2. Assign the IP trunk access code on the Number Plan tab window of
System Configuration. See “IP Trunk Access” on page 5-7.