background image

34

www.humancaregroup.com

Care instructions for the lift

•  The lift should be recharged every night
•   Wipe the overhead lift using a slightly 

dampened drying cloth. Washing up liquid 

can be used

•   Never wash the overhead lift using water or 

any other fluids.

•   NEVER use strong detergents on the 

overhead lift.

•   If the lift needs to be disinfected, DuPontTM 

Virkon® can be used

•   The lift belt must be washed and disinfected 

as instructed above

•   Activate the emergency stop if the 

overhead lift is not to be used for a few 

days. Otherwise the batteries will run down

•   The lift must always be stored or moved 

lying horizontally

Annual inspection

The lift must be inspected at least once a year 

by someone with Human Care qualifications 

and in accordance with Human Care’s directive. 

Pay particular attention to parts that show 

wear.  The lift’s service indicator will flash 

yellow when a service needs to be performed. 

Daily inspection

•   Always check the sling before use. There 

must be no loose seams or other signs of 

wear to lift belts, belts and fabric. If there 

are, replace the sling

•   Check the overhead lift for visible signs of 

damage

•   Check that the lift is correctly mounted in 

the distance strap or rail roller 

Monthly inspection

Check the lift belts for damage or wear and 

tear. Feed out enough of the lift belts to allow 

 Care instructions for the lift and accessories

their entire length to be checked. Contact a 

retailer if the belt is damaged

Service

Installation, service and maintenance must 

only be performed by personnel with Human 

Care qualifications and in accordance with 

Human Care’s directive.  Only original spare 

parts may be used.

Service agreements

Human Care invites you to sign a service 

agreement for annual inspection and test 

loading.

Transport and storage

During transport, or when the lift is not 

going to be used for some time, the mains 

switch must be off or the emergency stop 

button pushed in, otherwise the batteries 

will discharge. The lift must be transported 

and stored lying horizontally. The climatic 

conditions should be as follows: ambient 

temperature from 0 °C to 40 °C, relative 

ambient humidity from 30% to 80% and 

ambient pressure from 790 hPa to 1060 hPa.

Expected service life

The lift is expected to function for 11,000 

lifting cycles at maximum lifting capacity or for 

10 years with correct service and maintenance. 

Recycling

Worn-out overhead lifts can be returned 

to Human Care for recycling. NB: Contains 

batteries and electronics that contain lead and 

which must be recycled accordingly (WEEE 

2002/96/EC). For additional information on 

the accessories and technical documentation, 

please visit our website at www.

humancaregroup.com

Содержание 55030



















Отзывы: