www.humancaregroup.com
33
Troubleshooting
Description
Indicator
Action
Nothing happens when you press the Up
button or the Down button on the hand
control or the control panel
Not lit
1) Check that the mains switch is on.
2) The batteries are fully discharged. Charge the lift
immediately
3) The emergency stop is pushed in. Deactivate by turning
the red button clockwise.
Nothing happens when you press the Up
button or the Down button on the hand
control
Flashing green
Flashing yellow
Flashing red
Check the hand control. If the hand control is defective it
needs to be replaced. Contact a service technician.
Nothing happens when you press the Up
button or the Down button on the hand
control or the control panel.
Constant red
1) Lift motor is overheated. Wait a while and try again.
2) Lift is overloaded. Lower using the emergency lowering
button
Nothing happens when you press the Up
button or the Down button on the hand
control or the control panel.
Constant yellow
Charging in progress. Interrupt charging.
Nothing happens when you press the Up
button on the hand control or the control
panel.
Flashing green
Flashing yellow
Flashing red
The lift is in its maximum upper position. Press the Down
button on the hand control or the control panel to lower
the lift.
Nothing happens when you press the
Down button on the hand control or the
control panel.
Flashing green
Flashing yellow
Flashing red
The lift is in its maximum lower position. Press the Up
button on the hand control or the control panel to raise
the lift.
The belt is not fed out when the lift is on
a surface.
Flashing green
Constant green
Flashing yellow
Flashing red
The lift belt has to be pulled upwards at the same time as
the Down button on the hand control or the control panel
is held pressed in.
The indicator switches from flashing
green or yellow to flashing red.
Flashing red
The batteries need charging but you can still lift the
patient a few times. The lift should be set to charge as
soon as possible.
ENG
