www.humancaregroup.com
27
Suspending the lift from the rail
Place the lift on a suitable surface. Feed out
enough of the belt by pulling gently on the
hook on the lift belt (2) while at the same time
keeping the Down button on the hand control
or on the control panel of the lift pressed in.
Hook onto the hook on the distance strap
hanging from the rail roller diagonally from
above (see fig)
Switch on at the mains and the lift is ready for
use.
2
ENG
Two Speeds
When the lift is loaded with less than approx.
40 kg it can be run at two speeds. If the Up
or Down button is pressed for longer than 3
seconds, the lift will run in the faster mode. If
the lift is loaded with more than approx. 40 kg
it will only run in the slower mode.
Belt tension guard
The lift is equipped with a belt tension guard
that prevents unintentional discharging of the
lift belt. The lift must be loaded in order to
be able to pull the belt out. This means that
when the lift is lowered to a surface, the lift
belt is only fed out if it is pulled upwards while
the DOWN button on the hand control or the
control panel is held pressed in. The purpose of
this is to pull out enough of the lift belt in order
to be able to hook the lift onto the suspension
hook, or to unhook it.
