Alstom Reason RPV311, Техническое руководство

Страница: 157 / 350

RPV311 Chapter 6
– Records
RPV311-TM-EN-6 157
2 CONTINUOUS AND TRIGGERED FAULT RECORDS
Fault records can be created in the following ways:

Continuously:
Measurements are continuously recorded. A new record is available each 10 minutes. The record size
depends on the number of derived measurements selected by the user (limited to 16).

By trigger:
The fault recorder can be triggered by a Boolean equation, by a cross-trigger signal of another recorder or by
a manual trigger using the Web Interface.
Continuous and triggered fault records share the same mass storage area.
2.1 RECORDED VALUES
The following values are recorded by the fault recorder:

Voltage waveform of all voltage circuits (A, B, C, and N);

Current waveform of all current circuits (A, B, C, and N);

Transducer waveform of all transducer channels;

Digital channels (state of digital inputs and binary GOOSE messages).