Alstom Reason RPV311 Скачать руководство пользователя страница 211

Страница: 211 / 350

RPV311

Chapter 12

– RPV Tools

RPV311-TM-EN-6

211

Shows the identification and the version of the RPV Tools.

List of equipment configurations stored locally:

Equipment configurations

Name

Configuration name defined by the user

Location

Shows location of the equipment.

The location of the equipment is defined in the RPV
configuration. This information is read of the E

QUIPMENT

ONFIGURATION FILE

Identification

Shows the identification of the equipment.

The identification of the equipment is defined in the RPV
configuration. This information is read of the E

QUIPMENT

DENTIFICATION

Equipment

Shows the equipment model and firmware version to
which the configuration refers

Buttons to send or receive a configuration to or of a piece of equipment, to import or export a configuration

to or of a file, to edit or remove an equipment configuration which is locally stored, and to convert an older

version configuration for a newer version (the Convert button is applicable only for the model RPV-310).

Before using the Configuration Tool it may be necessary to install a plug-in file related to the firmware

version installed on the equipment.

2.3.2

PLUG-IN

Every equipment model and firmware upgrade has a new plug-in file to incorporate the changes to the

Configuration Tool.

The plug-in file is available with the firmware release.

Installation of the plug-in file is mandatory for any equipment model and firmware version that is to use this

tool.

To install the plug-in, do the following:

1. Double click on the plug-in file (example: rpv310-software.plugin. install-en-21A00).

2. Select the checkbox with the text to

Accept the agreement license terms

and click on the

Install

button.

Wait for installation to be completed and then click on the

Finish

button.

See C:

RPV

conftool

resourses

plugins to check which plug-ins are installed.

Содержание Reason RPV311































































































































































































































































































































































Результаты поиска

Содержание Reason RPV311

Отзывы:

Похожие инструкции для Reason RPV311

Бренды по названию

Популярные бренды

Alstom Reason RPV311, Техническое руководство

Результаты поиска

Содержание Reason RPV311

Отзывы:

Похожие инструкции для Reason RPV311

Бренды по названию

Популярные бренды