Alstom Reason RPV311 Скачать руководство пользователя страница 214

Страница: 214 / 350

Chapter 12

– RPV Tools

RPV311

RPV311-TM-EN-6

214

Select the name of the stored configuration to be deleted and click on the

EPORT

button;

An HTML Web page will open with a list of all configuration parameters.

The report consists of a header with the following information: owner, identifier, and location of the

equipment, revision number, date and time of the last configuration change.

To print this report, click on the

RINT

button.

2.3.10

TRANSMITTING A CONFIGURATION

To be able to transmit an equipment configuration, the user must be connected to the equipment by an

Ethernet or Modem interface.

Select the name of the stored configuration to be sent and click on the

RANSMIT

button;

Type the IP address of the equipment that will receive the configuration;

Type the description of the configuration changes and click on the

button;

Type the user name and the password to configure the equipment;

Click on the

button to transmit the configuration and to go back to the main screen of the

Configuration Tool.

2.3.11

EXPORTING A CONFIGURATION

It is possible to export a configuration to the computer. To export a configuration, do the following:

Select the name of the stored configuration to be exported and click on the

XPORT

button;

Type the name of the configuration file (.txt extension) and choose the storage location, then click on the

AVE

button.

The configuration file will be saved in the chosen location and can be imported into the RPV Tools.

2.4

TW FAULT LOCATOR

2.4.1

DESCRIPTION

The TW Fault Locator is a tool that uses the records of the traveling wave front signals at two ends of a

transmission line to locate a fault in this line.

To record traveling waves in RPV it is necessary to install the appropriate acquisition module, RA333. The

records of traveling waves at both ends of the line should be transferred of RPV's to the specific area of

records in the user's computer that will run the Fault Locator software.

By using a graphic interface, based on the distance between terminals A and B and on the time stamp of the

wave front, and by running the algorithm, the fault can be located. If unable to locate the fault automatically

by the software, it is necessary to use a graphical tool to identify the times of the wave front of each terminal

manually. Of the time identified it is possible run the fault locator graphically. If the locations of the towers

between the ends of the line are defined, the results are georeferenced and a KML file is created for viewing

through Google Earth.

Содержание Reason RPV311































































































































































































































































































































































Результаты поиска

Содержание Reason RPV311

Отзывы:

Alstom Reason RPV311, Техническое руководство, Страница: 214 / 350

Результаты поиска

Содержание Reason RPV311

Отзывы: