35
-EN
Setting item:
Source Volume Setup
Radio / DAB / Compressed Media*
1
/
iPod Music / iPod Video or AUX*
2,3
/ HDMI*
3
/ Bluetooth Audio
Setting contents:
-14 to +14 (Initial setting: 0)
*1
Compressed Media is the music data in a USB flash drive (MP3/
WMA/AAC/FLAC).
*2
The item selected in AUX Source Select (iPod Video or AUX) is
displayed. For details, see “Setting the AUX Mode” (page 44).
*3
The source name set in “HDMI Setup” (page 44) and “Setting the
Auxiliary (AUX) Name” (page 44) is displayed.
• Settable source differs depending on the connected device and settings.
You can adjust the volume of the incoming call.
Setting item:
Caller Level
Setting contents:
1 to 11 (Initial setting: 5)
You can adjust the transmit volume, during the call.
Setting item:
Microphone Level
Setting contents:
1 to 11 (Initial setting: 5)
You can adjust the receive volume, during the call.
Setting item:
Ring Tone Level
Setting contents:
1 to 6 (Initial setting: 3)
You can change the volume of the sound heard when a button is
touched.
Setting item:
Key Sound
Setting contents:
0 to 6 (Initial setting: 3)
The volume of the sound heard is raised automatically according to the
noise level by detecting engine noise and road noise.
Setting item:
Auto Volume
Setting contents:
Off (Initial setting) / Low / Middle / High
• The increasing rate of volume becomes large in this order: Low
Middle
High.
The sound can be muted when the shift gear lever is set to the reverse
(R) position enabling you to easily hear sensors, etc., while reversing
your car.
Setting item:
Mute while backing up
Setting contents:
Off / On (Initial setting)
You can restore the Dual HD EQ*/X-OVER*/Time Correction*/MX HD
Level/Rear Speaker/Subwoofer/Subwoofer Level/Subwoofer Phase to
factory settings.
Setting item:
Default Sound Settings
Touch
[Set]
, and the confirmation message appears.
To initialise, touch
[OK]
.
*
The setting values that are stored in Preset 1 to Preset 3 cannot be
initialised.
Setting the Volume for Each Source
Adjusting the Caller Level
Adjusting the Microphone Level
Adjusting the Ring Tone Level
Volume Setting
Auto Volume Setting
Setting Audio Mute On/Off while Backing up
Off:
Does not mute.
On:
Mutes when the shift gear lever is set to the reverse (R)
position.
Default Sound Settings