19
-EN
Setting the BASS ENGINE SQ
Setting the BASS ENGINE Type
Creating the ideal Bass impact for your musical taste using BASS
ENGINE SQ.
Setting contents:
Standard (Initial setting) / Punch / Rich / Mid Bass / Low Bass
Adjusting the BASS ENGINE Level
You can adjust the BASS ENGINE Level.
Setting item:
BASS ENGINE Level
Setting contents:
0 to 6 (Initial setting: 3)
• The BASS ENGINE Level 0 of the BASS ENGINE SQ is common to all
the types.
About setup when the external power amplifier is
connected
In order to optimise the BASS ENGINE SQ mode, we recommend the
following procedure to set up the power amplifier.
Use your favourite music to make the following amplifier adjustment.
1)
Set GAIN of the power amplifier to “MIN.”
2)
Set the Crossover Mode Sector switch to “OFF.”
• If the switch has no “OFF” position, set as near as possible to full
range.
3)
Set the BASS ENGINE Level to “03.”
4)
Play a song of the genre you frequently listen to, and adjust
GAIN of the power amplifier.
The Rear Seat Entertainment function independently routes different
sources to the front and the rear side of the car. For example, while
listening to the radio or other audio sources in the front, HDMI can be
enjoyed at the rear with optional rear monitors and headphones.
Rear Seat Entertainment System Setup screen
Button for changing to the Sound Setup screen.
Visual source selection area that is displayed on the Rear
monitor.*
1, 2
Touch the source icon displayed on the Rear monitor.
Auto: The image and sound of the same visual source as the unit
are output.
Off: Stops output to the Rear monitor.
Illumination Colour button*
3
The colour coordination select button of the Rear monitor:
White/Blue/Green/Amber/Red/Purple/Skyblue/Off
(This function is depended on Over Head Monitor)
Remote Sensor
You can set whether the sensor on Rear monitor receives remote
control operation, or the unit receives it.
*1
The visual source that can be output to the Rear monitor is “HDMI/
DVD,” “iPod Video,” and “AUX.” When the unit plays back the visual
source, you can only select the same visual source as the unit.
*2
When selecting AUX and iPod video source selection, the “Additional
AUX BOX” setup (page 48) is set to “On” and an optional external
AUX distribution box is required.
*3
When the Illumination Colour in “Setting the Rear Seat Entertainment
System” (page 47) is set to “Off,” the Illumination Colour button is not
displayed.
• If the same visual source is being output to both the unit and the Rear
monitor when an incoming/outgoing call is made, the visual/audio
output to the Rear monitor is interrupted temporarily depending on the
source.
If different visual sources are being output to the unit and the Rear
monitor, visual/audio output to the Rear monitor continues without
interrupting playback.
About the Menu Screen
In the menu screen, you can select the audio source and perform various
setups or operations on the unit.
Press the
MENU
button.
The menu screen is displayed.
• You can also display the menu screen by touching
[
]
on
the lower part of the Audio source screen or by swiping upward.
The screen changes to the menu screen.
Standard:
Mild low-end boost with mid-range focus for front-
centre staging.
Punch:
Mid-bass punched up with mid-range impact.
Rich:
Accented highs and mid-bass giving outstanding
balance for all types of music.
Mid-Bass:
Strong high frequency emphasis with mid-bass boost
for more low-end attack.
Low-Bass:
Strong, low-bass boost with extended highs for a very
dynamic sound.
Rear Seat Entertainment Function
