48
-EN
Installation and Connections
• Turning on the power
Depending on the system components, the DHA-
S680P’s may not turn on. If so, use the
procedure described below to turn on the power.
Connect the remote control sensor unit to the
DHA-S680P.
Remote control operation is not possible unless
the remote control sensor unit is connected.
Press and hold the V.OUT button on the remote
control unit for at least 2 seconds to turn the
power on.
Display the DHA-S680P’s screen on the monitor.
When using an AV head unit, switch with the
V.SEL button. When using a TV monitor, switch
with the AUX button.
This completes preparations for making the
settings. Now change the Ai-NET setting and
H.U. Control setting as described below. Do not
insert discs yet.
• Making the Ai-NET setting
Make the setting for signal transfer with the
connected Ai-NET products.
Press and hold the SET button on the remote
control unit for at least 2 seconds.
The initial setting menu appears.
Select “CUSTOM SETUP” using the Joystick,
then press the ENT button.
Select “Ai-NET SETUP” using the Joystick, then
press the ENT button.
When the DHA-S680P is connected to an Alpine AV head unit or a regular Alpine head unit, its system
settings must be made. Be sure to change the system settings before fastening the DHA-S680P in place.
• Making the “H.U. CONTROL” setting
When the DHA-S680P is connected to an Ai-NET
compatible head unit or an Ai-NET compatible AV
head unit, make the following setting so the DHA-
S680P can be operated from the head unit.
Select “H.U. CONTROL SETUP” using the
Joystick, then press the ENT button.
1
2
4
3
7
5
6
8
Changing the System Settings
Select “DVD-CHG” or “CD-CHG” using the
Joystick, then press the ENT button.
•
Set to “DVD-CHG” in the following cases:
When connection is made to the head unit
(e.g., CDA-7990R/CDA-7873R/CDA-7878R
which support Ai-NET and were available
after January 2001) or AV head unit (e.g.,
CVA-1006R/CVA-1003R/IVX-M706/IVX-C806
which support Ai-NET and were available
after January 2001).
DVD-CHG is the factory setting.
•
Set to “CD-CHG” in the following cases:
1
When connection is made to a head unit
(excluding CDA-7990R) which supports Ai-
NET and was available prior to January
2001 or AV head unit (e.g., CVA-1005R,
IVA-M700R, and IVA-C800R)
When the DVD-CHG setting is made with
the aforementioned head units,
identification of the DHA-S680P will no
longer be possible and operation from the
head unit will no longer be possible.
2
When the DHA-S680P is connected using
the KCA-410C Versatile Link Terminal.
Next make the “H.U. CONTROL” setting.
Содержание DHA-S680P
Страница 2: ......