Alpine DHA-S680P, Руководство пользователя

Страница: 28 / 68

26
-EN
Default Settings (SET UP)
NOTE
Press the RTN button to return to the previous screen.
4
Press and hold the SET button for at least 2
seconds.
The settings are stored and the set up mode is
canceled.
ENT
BAND
RTN
V.OUT
DISP
MENU
SET
CHG
Changing the down sampling
setting
Converts linear PCM (LPCM) voice signals
recorded on the DVD disc to downsampling 48
kHz/16 bit digital signals and outputs them from
the optical cable.
NOTE
When the settings are changed, the old settings are
overwritten. Make a note of the current settings before
making changes. The settings are not cleared even when
the vehicle’s battery is disconnected.
1
In the stop mode, press and hold the SET button
for at least 2 seconds.
The default setting menu appears.
NOTE
This operation cannot be performed in the PRE-STOP
mode. When the disc is being played, press the
■
button
twice to set the stop mode.
2
Use the Joystick to select “DOWN SAMPLING”,
then press the ENT button.
OFF
ON
3
Move the Joystick up and down to choose “ON”
or “OFF” and, then press the ENT button.
The digital signals recorded on the DVD disc with
96 kHz/24bit, 96 kHz/20bit, 96 kHz/16bit, 48 kHz/
24bit, 48 kHz/20bit sampling are converted into
digital signals with 48 kHz/16bits sampling for
output from the optical cable.
Set to ON at time of shipment from factory.
The digital signals recorded on the DVD disc with
96 kHz/24bit, 96 kHz/20bit, 96 kHz/16bit, 48 kHz/
24bit, 48 kHz/20bit sampling are not converted
into digital signals with 48 kHz/16bits sampling.
They are not output from the optical cable.