Alpha-InnoTec LW 161H/V Скачать руководство пользователя страница 4

4

Subject to change without notice  |  83061600bUK  |  ait-deutschland GmbH

3  Intended use

The unit is only to be used for its intended purpose. 

This means:

 

● for heating.

 

● for water heating.

The  unit  may  be  operated  only  within  its  technical 

parameters.

 

“Technical data / Scope of supply”, page 27

 NOTE

Notify the responsible power supply company 

of  the  use  of  a  heat  pump  or  heat  pump 

system.

Disclaimer

The  manufacturer  is  not  liable  for  damage  or  losses 

resulting  from  any  use  of  the  unit  which  is  not  its 

intended use.

The manufacturer's liability also expires:

 

● if work is carried out on the unit and its compo-

nents contrary to the instructions in this operat-

ing manual.

 

● if work is improperly carried out on the unit and 

its components.

 

● if work is carried out on the unit which is not de-

scribed in this operating manual, and this work 

has not been explicitly approved by the manu-

facturer in writing.

 

● if the unit or components in the unit have been 

changed,  modified  or  removed  without  the  ex-

plicit written consent of the manufacturer.

EC conformity

The unit bears the CE marking.

 

“EC Declaration of Conformity”, page 47

Safety

The unit is safe to operate when used for its intended 

purpose.  The  construction  and  design  of  the  unit 

conform  to  current  state-of-the-art  standards,  all 

relevant  DIN/VDE  regulations  and  all  relevant  safety 

regulations.
The operating manuals supplied with the product are 

intended for all users of the product.
The operation of the product via the heating and heat 

pump control and work on the product which is intend-

ed for end customers / operators is suitable for all age 

groups of persons who are able to understand the ac-

tivities and the resulting consequences and can carry 

out the necessary activities.
Children and adults who are not experienced in han-

dling  the  product  and  do  not  understand  the  neces-

sary  activities  and  the  resulting  consequences  must 

be instructed and, if necessary, supervised by persons 

experienced in handling the product and who are re-

sponsible for safety.
Children must not play with the product.
The product may only be opened by qualified personnel.
All instructional information in this operating manual is 

solely directed at qualified, skilled personnel. 
Only  qualified,  skilled  personnel  is  able  to  carry  out 

the work on the unit safety and correctly. Interference 

by  unqualified  personnel  can  cause  life-threatening 

injuries and damage to property.

 

► Ensure that the personnel is familiar with the  local 

regulations, especially those on safe and hazard-

aware working.

 

► Only  allow  qualified  personnel  with  “electrical” 

training  to  carry  out  work  on  the  electrics  and 

electronics.

 

► Only  allow  qualified,  skilled  personnel  to  do  any 

other work on the system, e.g.

 

● Heating installer

 

● Plumbing installer

 

● Refrigeration  system  installer  (maintenance 

work)

Every person who carries out work on the unit must 

comply  with  the  applicable  accident  prevention  and 

safety  regulations.  This  applies  in  particular  to  the 

wearing of personal protective clothing.

Содержание LW 161H/V

















































Отзывы: