Alpha-InnoTec LW 161H/V, Руководство по эксплуатации

Страница: 16 / 48

16
Subject to change without notice | 83061600bUK | ait-deutschland GmbH
3. Insert the wire mesh in the installation frame.
4. Position the weather / rain louvre on the installa-
tion frame in the wall penetration and screw on.
8 x
NOTE
Attach the weather louvre if the wall
penetration is above ground level.
If the wall penetration is installed in an air well
(below ground level), attach the rain louvre.
5. Repeat procedure 2 – 4 at the air outlet side.
Installing the frame trim
Screw the frame trim onto the wall penetration on the
air inlet and air outlet side.
NOTE
The frame trim does not fulfil any technical
function; it is merely for establishing a visually
attractive transition with the wall surface.
Installing the wire mesh and the weather / rain
louvre
1. Remove the wire mesh and weather / rain louvre
including the installation frame and fixing materi-
als from the relevant box.
2. From the outside of the building, insert the instal-
lation frame in the wall penetration of the air inlet
side and screw tight.
8 x