Alpha-InnoTec LW 161H/V, Руководство по эксплуатации

Страница: 22 / 48

22
Subject to change without notice | 83061600bUK | ait-deutschland GmbH
26 Installation and removal of the
screen
26.1 Installing the screen
NOTE
The screen is provided at the time of delivery
so that the control element may be inserted in
the upper recesses of the front facade.
If the control element has been inserted in
the lower recesses of the front facade, you
must first remove the screen‘s temporary
cover and then reinsert it above the logo.
Screen at time of delivery:
1 recess for control element
2 logo
3 temporary cover
1. First, insert the screen
below
, in the provided
slots on the front of the facade.
2. Beginning first on one side and moving upwards,
lock the screen‘s snap-in lugs in place in the
slots provided on the front of the facade.
3. Next, on the opposite side, moving upwards.
lock the screen‘s snap-in lugs in place in the slots
provided on the front of the facade.
4. Finally, press the screen‘s upper snap-in lugs into
the slots provided on the front of the facade.
26.2 Removing the screen
In order to remove the screen, the snap-in lugs must
first be loosened by pressing one side completely
toward the middle of the screen .
Thereafter, remove the snap-in lugs from the opposite
side.