Alpha-InnoTec LW 161H/V, Руководство по эксплуатации

Страница: 12 / 48

12
Subject to change without notice | 83061600bUK | ait-deutschland GmbH
2. Pull the lower facing panel upwards and outwards
at an angle, lift out and put in a safe place.
3. Remove the screws in the underside of the upper
facing panel.
4. Lift up the facing panel at an angle, unhook it and
put it in a safe place.
Then remove the side facing panels from the unit
too and put them in a safe place.
5. At the fan, thread in the two guide rods supplied
with the unit through the metal tab and fan.
Then, on both sides, hook the guide rods in the
key-hole perforation of the top metal tab inside
the unit.
6. Undo all four nuts (M12) of the fan's threaded fit-
tings inside the unit and remove together with the
spring lock washers.
7. Push in the fan in the direction of the evaporator,
up to the top metal tab inside the unit.
1 top metal tab inside the unit
8. Push the M12 x 40 (2x) bolts supplied through the
fan and the top metal tab and secure with M12
nuts.