12
III/ Electrical connection
1
2
To reveal the lower section, slide cover up about 15cm.
Whilst sliding cover upwards, pull cover gently towards
you. This will ensure it finds the locking slot.
Box as you find it, closed. Unscrew the 4 screws on the
underside of the SolShare to allow access to connection
terminals. Retain screws to replace later.
Important:
The cover should lock into place when it’s pulled up properly. Before beginning wiring, ensure cover is
locked in place by pulling down firmly.
To bring cover back to initial position, lift cover upwards and away from you, then allow to slide down
back into place.
Caution:
Risk of crush hazard if cover dislodged while in service position.
A. Input / Output Connections
1. Lift up cover to reveal the lower section of the box, where the electrical connections are made.
