Allnet ALL-NAS1000, Руководство пользователя, Страница: 3 / 137

3
Safety Warnings
For your safety, please read and follow the following safety warnings:
Read this manual thoroughly before attempting to set up your
ALL-NAS1000.
Your ALL-NAS1000 is a complicated electronic device. DO NOT attempt to
repair it under any circumstances. In the case of malfunction, turn off the
power immediately and have it repaired at a qualified service center.
Contact your vendor for details.
DO NOT allow anything to rest on the power cord and DO NOT place the
power cord in an area where it can be stepped on. Carefully place
connecting cables to avoid stepping or tripping on them.
Your ALL-NAS1000 can operate normally under temperatures between 0°C
and 40°C, with relative humidity of 20% – 85%. Using the ALL-NAS1000
under extreme environmental conditions could damage the unit.
Ensure that the ALL-NAS1000 is provided with the correct supply voltage
(AC 100V ~ 240V, 50/60 Hz, 3A). Plugging the ALL-NAS1000 to an incorrect
power source could damage the unit.
Do NOT expose the ALL-NAS1000 to dampness, dust, or corrosive liquids.
Do NOT place the ALL-NAS1000 on any uneven surfaces.
DO NOT place the ALL-NAS1000 in direct sunlight or expose it to other heat
sources.
DO NOT use chemicals or aerosols to clean the ALL-NAS1000. Unplug the
power cord and all connected cables before cleaning.
DO NOT place any objects on the ALL-NAS1000 or obstruct its ventilation
slots to avoid overheating the unit.
Keep packaging out of the reach of children.
If disposing of the device, please follow your local regulations for the safe
disposal of electronic products to protect the environment.