Allnet ALL-NAS1000, Руководство пользователя, Страница: 122 / 137

122
Chapter 5: Tips and Tricks
USB and eSATA Storage Expansion
The ALLNET IP storage supports external USB hard disks through its USB ports.
Once a USB hard disk has successfully mounted, the entire volume will be linked
automatically to the default USB HDD folder. The ALLNET IP storage supports USB
external storage devices. All file names on the USB disk volume are case sensitive.
The ALLNET IP storage also supports eSATA hard disks with its eSATA port.
Before attaching an eSATA or USB disk drive to ALLNET IP storage, you have to
partition and format it on a desktop computer or a notebook first. The attached
device will be located at
\\192.168.1.100\usbhdd\sd(x)1
where
192.168.1.100
means the IP address of ALLNET IP storage and
sd(x)1
stands for the first partition
on the eSATA or USB disk drive.
Remote Administration
You can set up your ALLNET IP storage for remote administration. With remote
administration, you can access your ALLNET IP storage over the Internet, even if
your ALLNET IP storage is behind a router. This is especially useful if you are
traveling and suddenly need a file from your ALLNET IP storage.
Setting up remote administration is a three-part process, and will require the
following equipment:

ALLNET IP storage device

Cable / DSL Router with Dynamic DNS support

Home PC

Internet Connection
NOTE
Router setup will differ slightly depending on router used. For this example,
we will use the Asus WL500g because it has support for Dynamic DNS.
Contact your router hardware vendor for setup help.