Allnet ALL-NAS1000, Руководство пользователя, Страница: 17 / 137

17
Icon Function Description
▲ Up Button Select the previous configuration settings option.
▼
Down Button USB copy confirmation display.

Enter Enter the selected menu option, sub-menu, or parameter setting.
ESC Escape Escape and return to the previous menu.
There are two modes of operation for the OLED: Display Mode and Management
Mode.
Display Mode
During normal operation, the OLED will be in Display Mode.
Display Mode
Item Description
Host Name Current host name of the system.
WAN/LAN1 Current WAN/LAN1 IP setting.
LAN2 Current LAN2 IP setting.
Link Aggregation Current Link Aggregation status
System Fan Current system fan status.
CPU Fan Current CPU fan status
2009/05/22 12:00 Current system time.
RAID Current RAID status.
The ALLNET IP storage will rotate these messages every one-two seconds on the
OLED display.
USB Copy
The USB Copy function enables you to copy files stored on USB devices such as USB
disks and digital cameras to the ALLNET IP storage with a press of a button. To use
USB copy, follow the steps below:
1. Plug your USB device into an available USB port on the Front Panel.
2.
In Display Mode, press the Enter (

).
3. The LCD will display “
USB Copy?
”
4. Press Enter (

) and the ALLNET IP storage will start copying USB disks
connected to the front USB port. The LCD will display the USB copy progress
and results.
Typical Setup Procedure
From the Web Administration Interface, you can begin to setup your ALLNET IP
storage for use on your network. Setting up the ALLNET IP storage typically follows
the five steps outlined below.
For more on how to use the Web Administration Interface, see
Chapter 4:
Web Administration Interface .
Step 1: Network Setup
From the Web Administration Interface, you can configure the network settings of
the ALLNET IP storage for your network. You can access the Network menu from
the menu bar.
For details on how to configure your network settings, refer to