24
35
35
• In the
function display (33)
, rotate the
«e-Drive»
to select the
Settings
menu.
• Press the
«e-Drive»
briefly.
• Select “Duty Info” in the “Setup” menu by rotating the
«e-Drive»
and pressing it briefly .
• Rotate the
«e-Drive»
to select “Day Distance” and press the
«e-Drive»
briefly.
• The hour counter symbol
is highlighted. Press the
«e-Drive»
to confirm.
• The day's distance is deleted.
• In the
function display (33)
, rotate the
«e-Drive»
to select the symbol
“Return to working display”
.
• The GEOSTAR has ten freely definable recipes.
• Selecting the
symbol
in the
function display (33)
takes you to the “load recipes” menu. The recipes can
be selected with the
“Up” and “Down” (27/28)
keys and confirmed by pressing the
«e-Drive»
.
• If, during operation, you change setpoints in recipes you have created, the setpoints will not be saved in the recipe.
• Every time the machine is switched on/off, the values defined in the recipe will reappear.
• The currently selected recipe can be seen on the left in the status display
“Section 1” (35)
.
• If you would like to use the last set values when you switch on the machine again, you must select the BASIC recipe.
• If the “BASIC” recipe is selected, then the “BASIC” recipe will not appear in the status display
“Section 1” (35)
,
but instead the voltage that is present on the device.
The key lock is activated or deactivated by simultaneously pressing
“Up” and
“Down” keys (27/28)
for at least
2 seconds.
Recipe name
Voltage display
8.8 Deleting the day's distance
8.9 Key lock
8.10 Recipe selection
