10
Symbol
Meaning
Drive speed [m/min / ft./min]
Drive speed blocked [m/min / ft./min]
Welding wedge temperature [°C/°F]
Welding force [N/lbf]
Information box
Devices in standby mode. The heating is switched off after the counter runs through.
See Chapter “Warnings and error messages”
380
160
°C
The arrow pointing upward and the progress bar indicate that the setpoint
(shown on the progress bar) has not yet been reached (too cold). The flashing value
is the actual value. The value next to the progress bar is the setpoint.
390
°C
380
The arrow pointing downward and the progress bar indicate that the setpoint
(shown on the progress bar) has not yet been reached (too hot). The flashing value
is the actual value. The value next to the progress bar is the setpoint.
385
°C
380
If “Set Values” is activated, both the actual temperature (large font size) and the set
temperature (small font size) are displayed. Default setting ex-works.
°C
380
If “Set Values” is deactivated, then only the actual values (large) are displayed
during operation, otherwise only the setpoint values (large).
Working display (34)
