Allied BreakerLube CML Series Скачать руководство пользователя страница 14

Страница: 14 / 62

Allied Construction Products, LLC www.alliedcp.com

TM102783_BreakerLube CML_15jul

3.0 Warranty Protection Summary - [cont’d]

3.3 Allied Product Policies

In this manual, Allied recommends the use,
applications, maintenance and service consistent
with industry practices.

Allied assumes no responsibility for the results of
actions not recommended in this manual and
specifically the results of:



Improper

Installation, Set-up, Calibration



Carelessness / Incorrect operating methods



Inattention to re-lubrication and other
maintenance requirements



Misuse / Unapproved applications



Inadequate or Absence of Training



Use of non-genuine Allied replacement parts



Unapproved

modifications



Use of grease, which is not or is only
conditionally Pumpable



The use of a lubricant type that is unsuitable for
the application. Allied Chisel Paste is
recommended for all breaker models.



Contaminated

lubricants.



Improper disposal of used or contaminated
lubricants.

These exclusions apply to damage to the Allied
equipment, associated equipment and injury to
personnel.

Содержание BreakerLube CML Series































































Результаты поиска

Содержание BreakerLube CML Series

Отзывы:

Похожие инструкции для BreakerLube CML Series

Бренды по названию

Популярные бренды

Allied BreakerLube CML Series, Безопасность, установка, эксплуатация, техническое обслуживание и запасные части

Результаты поиска

Содержание BreakerLube CML Series

Отзывы:

Похожие инструкции для BreakerLube CML Series

Бренды по названию

Популярные бренды