Allied Construction Products, LLC www.alliedcp.com
2
TM102783_BreakerLube CML_15jul
2.0 Product Identification
2.1 Product Identification Tag
Fig 2-1 Product Identification
Refer to Figure 2-1. The Model and Series Number
assigned to this equipment can be found on the
Product Identification Tag
The Identification Tag is affixed to the pump housing.
It provides the following information:
Manufacturer’s name
Model Code
Series
P max Bar
Operating Voltage U= P=W
Confirm that the information contained on the Tag
corresponds with the information provided in Section
1, Table 1.1.
2.2 Record Product ID Information for Future
Reference
Your local Allied dealer requires complete information
about the equipment to better assist you with
questions regarding parts, warranty, operation,
maintenance, or repair.
Copy the Model and Series Number from the
Equipment Identification Tag to the space
provided below.
Indicate the date in which the Allied equipment
was placed into service.
Fill out the Warranty Registration form and return
to Allied Construction Products, LLC.
Product / Series
BreakerLube CML
MFR:
Model Code
P. No:
Series Number:
In Service Date:
Registration Date
When inquiries are made, specify by name,
voltage, reservoir capacity and number of
pumping elements and lube lines, e.g.:
BreakerLube CML, 24VDC, 2 gallon, 2-pumping
elements bridged into 1 lube line 60’.
X BreakerLube
X
CML (BPA units without pcb controller)
Operating
Voltage
Reservoir
Size
Pumping Elements – Qty
Relief Valves – Qty
Lube Lines – Qty & Length
Notes:
