Allied Construction Products, LLC www.alliedcp.com
1
TM102783_BreakerLube CML_15jul
1.0 Introduction and Scope
1.1 About this Manual
Prior to use, confirm that the information recorded on
the equipment’s identification label (Fig. 2-1)
corresponds with Table 1.1.
Table 1.1 About This Manual
Document ID No.
TM102783
Type:
Safety, Operation,
Maintenance, Installation &
Parts
Current Status:
See Inside Cover
Product Name:
BreakerLube
TM
Series / Generation:
CML-II
Applicable Model[s]:
12 & 24VDC / 1 & 2 Gallon
Years of Production:
Begin 2002
This manual has been prepared in support of the
product named in Table 1.1 and is intended to assist
the operator and maintenance personnel with the
information necessary for the safe and proper use of
the Allied equipment.
The spare parts list is also included in this manual.
Illustrations depicted in the Parts Information Section
are for purposes of parts identification and are not
intended for use in repair or service of the equipment.
Material presented in this manual, including tables,
figures, descriptions and captions, may show
equipment that is optional. Figures, captions, parts
tables and descriptions are intended solely for use
with the product identified in Table 1.1 and may not
be suitable for use with other models.
This manual is an integral part of this product. Keep it
in a convenient location so that it is easily accessible
for future reference.
1.2 Content Includes
Safety
Section
Equipment
Identification
Operating
Principle
Configurations – Equipment Options
Installation
Guidelines
Maintenance & Care
Recommended
Lubricants
Priming / Pre-filling Lines
Troubleshooting
Removal & Storage
Technical Data / General specifications
Parts Information - Spare / Replacement
The publication identified in Table 1.1 was created
solely for information purposes and should not be
considered all-inclusive. If further information is
required, contact your local Allied dealer or the Allied
Customer Support Department.
The content of this document has been reviewed for
accuracy. Allied Construction Products, LLC has
endeavored to deliver the highest degree of accuracy
and every effort has made to provide information as
complete as possible. However, continuous
improvement of our products is an Allied policy. The
material in this publication, including figures,
captions, descriptions, remarks and specifications,
describe the product at the time of its printing, and
may not reflect the product in the future. A table of
revision history for this document is found on the
inside cover.
1.3 How To Order Replacement Publications
Replacement manuals may be ordered by contacting
your local Allied dealer or the Allied Customer
Support Department. Manuals may also be viewed
and downloaded at: www.alliedcp.com
1.3.1 Related Publications
Allied Construction Products, LLC offers the following
publications for the product identified in Table 1.1.
Further publications are not available at the
time of this release
