Allied Construction Products, LLC www.alliedcp.com
iii
TM102783_BreakerLube CML_15jul
Safety Information – [cont’d]
Safety, Information and Identification Labels
Information labels affixed to the Allied equipment
include safety warnings, identification and
instructions important to operation and service. Refer
to Figure “L-15” for their location on the equipment.
Keep all safety labels clean. Words and illustrations
must be legible. Before operating this equipment,
replace damaged or missing labels. For replacement,
refer to the appropriate Parts Manual for
identification.
Fig.
Label
Description
L1
READ INSTRUCTIONS
- Decal directs personnel to the manual for
further information / instructions.
L2
Crush Point
– Decal alerts personnel to maintain a safe distance
from moving parts.
L3
LUBRICATION POINT
– Decal identifies lubrication points. Refer to
the manual(s) for grease type, re-lubrication schedules, procedures
and precautions that must be observed to prevent risk of equipment
damage if instructions are not followed or through unapproved
methods.
L4
Maximum Fill Line
– Decal indicates the maximum fill line when
refilling the cartridge with lubricant. The decal also calls attention to
hazard if overfilled.
L5
Grease Refill
- Decal identifies the location of the lube fitting used
for refilling the reservoir with grease.
L6
Manual Greasing
– Decal identifies the location of the lube fitting
used to manually grease the bushing & tool. Use this lube fitting to
pre-fill lube lines and passages.
L7
Rotation Arrow
– Indicates the direction in which the motor should
turn.
L8
ALLIED LOGO
– This decal is the Allied brand identifier and is a
registered trademark of Allied Construction Products, LLC.
L9
BreakerLube
Product Name
– Decal identifies the product.
L10
Product ID Tag
- Contains identifying information about the
equipment, including: Manufacturer’s name, model and series
number, maximum pressure and operating voltage.
