Cleaning optical components
69
Bonito PRO Technical Manual V1.0.0
Warranty
Keep optical components clean
The best way to ensure the camera remains clean is to avoid penetration of foreign
substances into the camera.
When screwing or unscrewing the camera lens or dust cap, hold the camera with
the mount opening towards the floor. This minimizes the possibility of any
contaminants falling on the glass surface. Always store cameras and lenses with
dust-caps on.
Read these instructions before you contact Allied Vision or your Allied Vision
distribution partner for assistance.
Contact Allied Vision or your Allied Vision distribution partner if you are not
familiar with the procedures described in this chapter.
For details about camera warranty duration and sensor warranty terms, go to:
https://www.alliedvision.com/en/support/warranty
To ensure your warranty remains in effect:
•
Do not open the camera housing.
•
Follow instructions described in this chapter.
•
Use only optical quality tissue or cloth if you must clean a lens or filter.
•
Use only optics cleaner. Do not use aggressive cleaners like benzine or spirit.
Such cleaners may destroy the optical component’s surface.
•
Do not use compressed air which can push dust into camera and lens unless
you are trained to clean a camera using this method.
Allied Vision does not warranty against any physical damage to the sensor, filter,
protection glass, or lenses. Use utmost care when cleaning optical components.
Allied Vision does not warranty against any physical damage to the sensor, filter,
protection glass, or lenses. Use utmost care when cleaning optical components.
i
